There is a huge range of pressure washers available on the market today and choosing the correct one can potentially be a minefield.
In this product review video we test out the Nilfisk C110 pressure washer on location at Orchardleigh Golf Club, find out how well it did and what we thought of it.
Visit: http://www.woodiesdiy.com for more infomation.
Architectural and interior design inspiration: http://www.homedesignlove.com
before and after
interior design ideas
room design ideas
interior design ideas, interior designs, home design, design ideas, interior design trends, home interior ideas, home interior, room design ideas, interior design, living room design, bedroom design, kitchen design, bathroom design, home office design, decorating child rooms, design a room, furniture design, interior decorating, home ideas, architecture, design tips, house decorating, home improvement, apartment decorating, kitchen counter-top, kitchen furniture
AR Blue Clean AR383 Pressure Washer http://goo.gl/3FIZSJ
helps to clean your car like a pro
1,900 PSI, 1.5 GPM, Annovi Reverberi Triplex 3 axial- piston pump
Total Stop System – power to the washer is controlled by the trigger gun
Hose reel with hand crank to keep the hose out of your way
30-foot power cord
A power washer can make quick work of cleaning the exterior of your house. It is pretty easy to do with some basic knowledge. Here are some simple steps
Video tutorial on how to wash dirt, grease, or grim away from your engine bay. Make sure your engine is cool when you do this procedure. Spray the solution onto the engine and around the engine bay, let it soak for approximately 5 minutes, then continue to rinse off with hose or pressure washer. Let engine dry for a few hours to prevent the vehicle from running rough. This particular video was done on a 2000 Subaru Outback 4 cylinder wagon.
The soap I used in this video is called Spray Nine, but I’m sure there is other cleaners available which will do the same job.
Areas to take caution around when washing:
-spark plug wires
-oil filling places (engine oil, transmission oil, power steering)
-brake fluid reservoir
To protect any areas you are worried about water entering, you can cover it up with a plastic bag.
-making sure your engine is cool, open the hood and spray the engine down with the Spray Nine cleaner
-let it soak for 3-5 minutes
-using a pressure washer, wash the soap, dirt, grease, grim off the engine being careful about the areas I cautioned about above
-if there is still some dirt remaining, you can respray the area with soap and pressure wash it again
-harder areas you can scrub down with a brush
-leaving the hood open, let the engine bay air dry
-using compressed air or a wet/dry shop-vac, you can speed up the drying process
Thank you to all those who watch my videos and support my content. Don’t forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
This is an overview of how we set up our custom pressure washing trailer.